Johnson Service Bulletin SB-737 Rev. 1 - Shift Lever Bind

April, 1965

SUBJECT: SHIFT LEVER BIND. SINGLE AND DUAL REMOTE CONTROL BOXES

Recently there has been a change made on the single and dual remote control box to eliminate side movement of the shift cable trunion.

The side movement present in some of the earlier control boxes will cause a bind- ing of the nylon rack against the shift lever. In some cases this bind will make it almost impossible to shift.

We have available a special guide to be used in the single control box and a spe- cial separator to be used in the dual con- trol box. These items are to be installed, as shown, if the binding condition exists.

Request either the guide or separator. Guide 377879 is required for the single control box and separator 378099 is re- quired for the dual control box. Direct your request for these items to the Johnson Motors, Service Department.

JOHNSON MOTORS

N. Peter Hansen Administrative Assistant

NPH:rs

NOTE: Post on your Miscellaneous Index Destroy SB-737 dated September 14, 1959, and SB-754 dated December 2, 1959.