March 14, 1960
Bulletin No. SB-769
Subject: MODIFICATION OF TOOL #304722 FOR INSTALLING DOUBLE LIPPED OIL SEAL,
UPPER JOURNAL BEARING - 18, 35 and 40 H.P. ENGINES.
To install double lipped seal #305937, upper journal bearing, tool #304722 must be
reworked to avoid damaging the upper rubber lip of the seal.
Reworking tools currently in dealers' possession is relatively simple and can be
performed by the individual dealer or by a local machine shop. Simply chuck the tool
in a lathe and machine according to the specifications furnished in the sketch above.
Even though modified, the tool can still be used to install single lipped seals if
and when required.
The parts depot's stock of this tool has been replaced with the modified unit so that
all future shipments will consist of the modified tool, ready for use on both the
double and single lipped seals.
The tool's part number remains unchanged and is priced at $.75 each, net, F.O.B.
Galesburg, Illinois.
Mail all orders for this tool with your prepayment, check or money order, directly to:
Outboard Marine Corporation Parts Depot
P.O. Box 470
Galesburg, Illinois
(over)