September 26, 1962
Bulletin No. SB-923
Special tools
SUBJECT: #379241 PULLER JAW SET
for removal of forward Electro-Magnet-
40 and 75 h.p. electric shift engines.
The subject puller jaw set, illustrated in
Figure 1, was designed to remove the forward
Electro-Magnet on both 40 and 75 h.p. electric
shift motors.
This new puller jaw set does not include the
puller shaft, pressing plate and extractor screw
as required for pulling, but is readily adaptable
to #378450 PULLER ASSEMBLY. Merely remove the
jaws supplied with #378450 PULLER ASSEMBLY and
install the new #379241 PULLER JAW SET.
This new tool is presently available from Out-
board Marine Corporation Parts Depot at the
following net price. COD orders are not accepted.
Mail all orders to:
OUTBOARD MARINE CORPORATION PARTS DEPOT
P.O. BOX 470
GALESBURG, ILLINOIS
PART NO. DESCRIPTION NET PRICE
379241 Puller jaw set $5.25
Do not order this tool from Johnson Motors nor
from your Parts Distributor.
Figure 1
#379241 Puller Jaw Set
INSTRUCTIONS FOR ADAPTING #379241 PULLER JAW SET TO #378450 PULLER ASSEMBLY.
1. Remove the items identified as A, A1 and A2 - Figure 2, from #378450 puller assembly.
2. Install #379241 (item B-Figure 2) on the puller shaft (item C-Figure 2) securing
assembly with pin attached to puller jaws. Puller is now ready for use.
NOTE: The pin, chained to #379241 PULLER JAW set is a special hardened pin and
must always be used to secure this jaw and puller shaft assembly.
Items A1 and A2 - Figure 2, are not to be used with the Electro-Magnet
puller jaw set #379241.
over
