A PRESSURIZED HYPOID OIL FILLER - GEARCASE

Shown here is really a time saver - simplifying the insertion of hypoid oil in the gearcase after repair - - "filling" in but a moment

or two -

To use --

1, Fill with about, 6 quarts of hypoid oil. 2. Pump to pressurize - ten to fifteen strokes. 3. Remove fill screw - bo'om of gearcase. 4. Place nozzle in position - hold. 5. Remove the vent or overflow screw - top of gearcase. 6. Gently depress nozzle lever - fill to level of vent screw hole. 7. Replace the vent screw. 8. Remove nozzle - replace fill screw.

(Replacing vent screw "air binds" oil in the gearcase).

Be sure the gasket areas are clean and free of burrs - install new gaskets under screw heads, if necessary. Available through -

STEVENS EXPERIMENTAL COMPANY

2015 Grand Avenue

Waukegan, Illinois Price $8.75 net, F.O.B. Waukegan, Illinois

ORDER DIRECT FROM STEVENS EXPERIMENTAL CO.

P.S. Destroy SPB #76 dated 2/23/61. SPB #76 - Not yet found.

JOHNSON MOTORSJack Penland
Service Promotion Manager