A NON-SEIZE SEALING COMPOUND FOR OUTBOARD TUNE-UP AND REPAIR

The Snap-On people of Kenosha, Wisconsin have introduced an anti-seize and sealing compound for Outboard Motor Tune-up and Repair. Its' called, as shown here, NEVER-SEEZ and comes in 1/4 pint cans.

NEVER-SEEZ is a non dying and sealing compound suggested for use on the threads of outboard screws, studs, nuts, some gaskets, etc., EXCEPT WHERE OTHERWISE SPECIFIED, which prevents seizing in position once installed to make removal later on, as required during normal shop functions, most difficult and costly. Situations of this sort are characteristic and frequently taken for granted in salt water areas - evident in fresh water regions too, but not to the extent encountered in salt water.

Thread seizure not only demands extra time unprofitably in the shop but so often results in stripped threads to further delay the job - especially true with cylinder head, water pump, lower unit and gearcase screws.

NEVER-SEEZ is designed to resist: 1. Pressure up to 15,000 P.S.I. 2. Heat up tp 2,000 degrees

Use the non-dying compound in your shop repairs to permit removal of screws, nuts, etc., during subsequent tune-up or repair with a minimum of time involved for a more profitable and satisfactory job. You'll find many other uses for it too in your Outboard Marine activity.

Order directly from the traveling Snap-On dealer who undoubtedly calls on you regularly or write to The Snap-On Tools Corporation Kenosha, Wisconsin for further details.

JOHNSON MOTORS

Jack Penland
Service Promotion Manager