April 8, 1964

SUBJECT: TIME SAVING SERVICE TOOLS

I am sure that many of you will be interested in the following TIME SAVING TOOLS, now available from the manufacture (SEE OVER). Keep in mind that TIME is the most costly item in your Service Shop Activity. It's got to be paid for whether used productively or not. Every advantage should be taken of the available time and labor saving aids - to get the most done with the least time and effort.

Illustrated figures #1 and #2 - a tool for winding the new spindle type starter spring. Figure #1 insert winder tool in the top of starter spindle. Wind the relaxed spring COUNTERCLOCKWISE TWENTY AND ONE-HALF TURNS. Invert the crank handle of winder tool and lock with set screw. The spindle spring is now properly wound and locked leaving both hands free to insert starter rope and tie the required knot. Hold tension on the starter rope. Remove the tool and allow the rope to slowly wind onto the spindle drum.

Illustrated Figure #3 - a tool to be used for properly aligning shift rod and shift rod connector. This tool permits perfect alignment, and eliminates stripping of the connector capscrew threads. (Used on all model with access to connector).

Take full advantage of the flat rate system. Conduct all service operations on a profitable time saving basis with assistance of available time and labor saving aids. It may be noble to be able to improvise but it sure costs TIME.

- over -