Evinrude Service Bulletin #1068: Gear Shift Adjustment

Issued January 1975, this factory bulletin provides a seven-step gear shift linkage adjustment procedure for 1975 Evinrude 9.9 and 15 HP outboards. It includes four factory photographs and diagrams showing the fuel hose, linkage components, cotter pin, and adjustment.

Evinrude Service Bulletin
CONTROLS #1068
January, 1975
GEAR SHIFT ADJUSTMENT 1975 9.9 AND 15 H.P. MODELS
The procedure listed below is the recommended method of adjusting the gear shift linkage on 1975 9.9 and 15 H.P. motors.
1.   Remove fuel hose on carburetor. See Figure 1.
Figure 1: remove fuel hose Figure 2: exploded shift linkage
Figure 1
Figure 2
2.   Remove cotter pin and washer from shift lever to lock lever link #319066. See Figure 2 & 3.
3.   Place lever and hub assembly #386387 and shift lever #386114 in reverse position.
4.   Adjust link and clevis to align with hole in shift lever to shift lock link lever #319151.

See Figure 4.

Do not exert any pressure on shift lever while making this adjustment.

(over)
Figure 3: cotter pin and washerFigure 4: shift linkage adjustment
Figure 3
Figure 4
5.   Shorten link one turn more for installation. Slight pressure will be necessary on shift lever when reinstalling link to shift lever to shift lock link lever.
6.   Install washer and cotter pin.
7.   Connect fuel hose to carburetor using a new clamp strap #320107.

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Carburetor Cleaner Spray, Jet Cleaning Wires & Rebuild Kit

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 386387

Search for original or compatible replacement part 386387. Check the bulletin for supersessions and model fit.

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.