Evinrude Service Bulletin #1108: Change in Carburetor Orifice Size for 1976 55 and 75 HP Models

1976 Evinrude bulletin specifying revised high-speed carburetor orifices on 55 and 75 HP models.

Evinrude Service Bulletin header
FUEL SYSTEM #1108
January, 1976
CHANGE IN CARBURETOR ORIFICE SIZE FOR 1976 55 AND 75 HP MODELS
The carburetor orifice diameter on several 1976 models has been changed.
1. 55 H.P.:
The orifice diameter on 1976 55 H.P. models has been increased from .053” (P/N 321297) to .054” (P/N 321407). These orifices are stamped either 53D or 54D for identification. If replacement of an orifice is necessary, replace both orifice with the 54D (P/N 321407).
2. 75 H.P.:
The orifice diameter on 1976 75 H.P. models has been reduced from .056” (P/N 318684) to .055” (P/N 320921). These orifices are stamped 56D or 55D for identification. If replacement of an orifice is necessary, make sure it is the same size as those in the other carburetors on the engine.
All service carburetors currently being shipped for 55 H.P. engines have the 54D orifice while those for 75 H.P. engines have the 55D orifice. If you replace a carburetor on one of these engines, make sure the orifices in the other carburetors match the one in the new carburetor.
EVINRUDE MOTORS
Service Department

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Carburetor Cleaner Spray, Jet Cleaning Wires & Rebuild Kit

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 321297

Search for original or compatible replacement part 321297. Check the bulletin for supersessions and model fit.

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.