Evinrude Service Bulletin 1111 - Replaceable Liner Water Pump

February 1976 service information explains the updated spacer and washer arrangement for the replaceable-liner water pump on 4 HP outboards.

Evinrude Service Bulletin header
LOWER UNIT #1111
February, 1976
REPLACEABLE LINER WATER PUMP FOR 1976 4 H.P. MODELS

All 1976 4 H.P. engines are equipped with a replaceable liner water pump as shown in the illustration at the right. In addition to the parts shown, early production engines were also equipped with an additional thin plastic washer immediately below the spacer. Engines equipped with the thin plastic washer had a 321126 spacer which was white in color. Recently the thickness of the washer has been added to the 321126 spacer so that the washer will no longer be needed. The new thicker spacers are black in color.

Remember, when servicing one of these units, if the spacer is white, the thin plastic washer must be used. If the spacer is black, the thin plastic washer must not be used.

Exploded water pump assembly with part-number labels
All items required for a replaceable liner water pump are available under kit part number 387362. This kit may be used for service on any 1968-76 1-1/2 and 2 H.P. or 1973-76 4 H.P. (90 degree gearcase).
EVINRUDE MOTORS
Service Department