Evinrude Service Bulletin #1118: OPERATION OF MANUAL RELEASE VALVE ON 1976 200 H.P.

Manual release valve operation on 1976 200 HP outboards. Published March, 1976.

Evinrude Service Bulletin
CONTROLS #1118
March, 1976
OPERATION OF MANUAL RELEASE VALVE ON 1976 200 H.P.
Several dealers have commented that the engine does not lower automatically when the manual
release valve is turned. They stated they had to physically help by pushing on the gearcase
or motor cover. This condition is normal and should not be considered a malfunction in the
tilt system.
Do not open the manual release valve more than the one turn recommended in the Owner’s -
Operator’s Manual.
▣   NOTE:
EVINRUDE MOTORS
Service Department

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Lower Unit Gear Oil Pump & Seal Puller Tool

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.