Spark Plug Wet Fouling on 25 H.P. Models

April 1976 procedure addressing seasonal spark plug wet fouling on 25 HP outboards. The uploaded file was labeled A-1127 but the factory page is numbered 1126.

Evinrude service bulletin header
IGNITION #1126

April, 1976

SPARK PLUG WET FOULING ON 25 H.P. MODELS

We have heard of some complaints of excessive spark plug wet fouling on 25 h.p. engines which occurs primarily in northern states during early Spring and late Fall. This condition can usually be eliminated by:

  1. Inserting a 203290 grommet in the by-pass hole in the cylinder head as shown in Figure 1.

    Since the 203290 grommet is larger than the by-pass hole, grinding approximately 1/8 off the diameter of the head will make the grommet fit the hole snugly. See Figure 2.

  2. Replacing the standard spark plugs with UJ-8IJ plugs gapped to .030". These plugs can be obtained from your parts distributor under part number 388150.
Figure 1 grommet installation and Figure 2 grinding dimension

Figure 1         Figure 2

EVINRUDE MOTORS
Service Department