Evinrude Service Bulletin #1127

Replacement gearcases for 1976 35 HP outboards require attention to the three-screw versus four-screw water pump impeller housing. The bulletin identifies impeller housing kit 388456.

Evinrude Service Bulletin
LOWER UNIT #1127
May, 1976

REPLACEMENT OF GEARCASES FOR 1976 35 H.P.

The first series 1976 35 H.P. engines (ā€œSā€ model suffix) had an impeller housing which was attached with three screws. The current series 1976 35 H.P. engines (ā€œGā€ model suffix) have an impeller housing which is attached by four screws. If you have to replace a gearcase and bearing assembly or a gearcase complete on a first series engine, you will be supplied with a gearcase drilled to mount a four screw impeller housing.

If this first series engine has not already been modified to use a four screw impeller housing, a new impeller housing kit (P/N 388456) should also be ordered and installed on the new gearcase. The 388456 Impeller Housing Kit includes instructions which should be reviewed and followed to insure that your customer has the benefit of the latest cooling system improvements.

EVINRUDE MOTORS
Service Department