
9.9/15 H.P. 1974 - 1976; 35 H.P. 1976; 40 H.P. 1974 - 1976
Improper lubrication of the armature plate bearing (delrin ring) and the armature plate pilot can lead to armature plate wobble, unstable timing, and damage to both the armature plate and the cylinder and crankcase assembly.
The proper lubricant for the armature plate bearing is Evinrude outboard motor lubricant (50/1 oil) applied to the bearing groove (inside diameter) only. See Figure 1. The bearing top, bottom and outside is not lubricated. The armature plate bearing is clamped between the armature plate and the retainer and link assembly and should turn with them.
The armature plate bearing has been improved and it is recommended that the earlier white or black parts be replaced with the later dark brown #322435 part if any of the above motors are in for ignition service.
The proper lubricant for the armature plate pilot bearing (cast-in brass bearing) is OMC Moly Lube #173250, spread lightly on the mating crankcase boss.
