Evinrude Service Bulletin #1137
Instructions for fitting Lexan plastic converging rings to aluminum through-hub propellers used on 50 HP through V-4 Evinrude outboards.

PLASTIC CONVERGING RING INSTALLATION ON ALUMINUM
THRU HUB PROPS 50 HP THRU V-4 OUTBOARDS
The lexan plastic converging rings used on some Evinrude 2, 3 cyl., and V-4 aluminum thru hub propellers are corrosion proof, tough and light weight, but do require service procedures slightly different from converging rings made of other materials.
These plastic converging rings will be damaged if exposed to strong chemicals. They should not be painted with lacquer paint or washed with lacquer thinner. They should not be washed with acetone, trichlorethylene, methylene chloride, or any of the common solvents, fuels or parts cleaners.
If a propeller with a lexan plastic converging ring is to be painted with a lacquer paint, the converging ring must be removed first, the converging ring groove masked, the propeller painted, and the converging ring reinstalled after one hour.
All plastic rings are easily installed with an arbor press and pressing plate. See Figure 1. Press only until the rings snaps into the groove.
