Evinrude Service Bulletin #1214: V-4 SENSOR ADJUSTMENT WITH SENSOR GAUGE

Issued January, 1979, this factory bulletin addresses v-4 sensor adjustment with sensor gauge.

Evinrude Service Bulletin header
TOOLS #1214

January, 1979

V-4 SENSOR ADJUSTMENT WITH SENSOR GAUGE

Some 1973-1977 V-4 motors that are hard starting may have the following symptoms: erratic or no spark when cranking with spark plugs installed, but good spark with the plugs removed.

This particular problem can usually be traced to excessive air gap between the flywheel sensor magnets and the ignition sensor coils. Too much air gap and low cranking speed reduces the sensor coil output voltage and causes the hard starting problem.

The sensor coil position (and air gap) may be checked and adjusted with the “V-4 Sensor Gauge.”

A limited supply of gauges are available for a net price of $4.00 each. If you would like to order this gauge, (including instructions) please return the lower section of this bulletin and return it to us with your remittance.

Send Order and Remittance To:

EVINRUDE MOTORS
P.O. BOX 663
MILWAUKEE, WIS. 53201
ATTN: SERVICE DEPT.

REMITTANCE (For Office Use)

6223-64 __________________

DATE __________________
Ship to:

_________________________________
_________________________________
_________________________________
________________________ Zip Code

Dealer Code ________________________

Check in the amount of $________ is enclosed

One-V-4 Sensor Gauge

All Orders Must Be Prepaid
Sorry, No C.O.D. Orders

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Spark Plugs (Champion/NGK) & Spark Plug Gap Gauge

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.