Evinrude Service Bulletin #1228: Gearcase Lubricant Level - All Models

Issued August, 1979. Lubrication bulletin covering evinrude outboards.

Evinrude Service Bulletin factory header
LUBRICATION #1228
August, 1979

SUBJECT: GEARCASE LUBRICANT LEVEL - ALL MODELS

Our Warranty Department has reported that several gearcases have been returned with major component failures due to low lubricant level.

□ NOTE

INSUFFICIENT GEARCASE LUBRICANTS WILL CAUSE SERIOUS DAMAGE TO LOWER UNIT COMPONENTS.

We highly recommend that dealers check the gearcase lubricant level on all new motors, and “top off,” if necessary, before delivering to the customer. This should be done slowly, as many gearcases require air to escape to allow gearcase lubricant to reach proper level.

All Owner’s/Operator’s Manuals state that the gearcase lubricant should be changed after the first 20 hours of operation and checked after 50 hours of operation. Add lubricant, if necessary. Drain and refill every 100 hours of operation or once each season, whichever occurs first.

CR 79-42

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

NMMA TC-W3 2-Stroke Marine Outboard Oil & Oil Mixing Ratio Bottle

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.