Evinrude Service Bulletin #1235: Use Of Gasahol

Factory guidance on the use of 10% ethanol gasohol in Evinrude outboards, including fuel mixture and octane precautions.

Evinrude Service Bulletin header
FUEL SYSTEM #1235

October, 1979

SUBJECT: USE OF GASAHOL

Outboard Marine Corporation has approved the use of gasohol in the United States in its Evinrude® Outboard Motors. Gasohol is a fuel generally composed of 10% ethyl alcohol and 90% lead free gasoline. HOWEVER, THE FOLLOWING PRECAUTIONS MUST BE TAKEN:

  1. Gasohol may be used as the primary fuel in all 1979 and 1980 outboard motors. However, 1978 and older motors were not designed with gasohol usage in mind. Occasional use is acceptable in the older motors, but frequent use is not recommended.
  2. V-6 motors require fuel with a minimum of 89 pump posted octane. Gasohol should not be used in these models unless it meets this octane requirement.
  3. Buy fuel as you need it. Gasohol tends to pick up moisture during storage.
  4. Gasohol may dull paint. Avoid spilling it on painted surfaces.
  5. Use Evinrude 50:1 oil and mix thoroughly. If not available, use any other BIA Certified TC-W oil at 50:1 and mix thoroughly.
  6. Fuel cans should be agitated each day prior to running the motor to ensure good fuel/oil mixture.
  7. Gasoline engines will operate leaner with gasohol. This may cause driveability problems associated with leaner mixtures.
CR 79-53   © OUTBOARD MARINE CORPORATION 1979 ALL RIGHTS RESERVED

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Ethanol Fuel Stabilizer & Water-Separating Fuel Filter Kit

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.