Evinrude Service Bulletin #1258: Premature Pinion Bearing Failure

Advises technicians to install the pinion bearing with its lettered side toward the powerhead to prevent early bearing failure.

Evinrude Service Bulletin factory letterhead

LOWER UNIT #1258

May, 1980

Subject: Premature Pinion Bearing Failure

Models: Evinrude V-6 Models

Early pinion bearing failure has been reported and has been traced to improper installation of the pinion bearing.

The design of this bearing requires it to be installed with the lettered side toward the powerhead, or up. When installed backward, this can result in an early failure.

See marking on bearing cage. See Figure 1.

Factory Figure 1: Premature Pinion Bearing Failure

Follow the service procedure as shown in your Service Manual for removal and installation of the pinion bearing.

When placing pinion bearing on installation tool, position bearing so when installed in gearcase lettered side of bearing cage will face powerhead.

After installation of new pinion bearing in gearcase, be sure to apply OMC Screw Lock (P/N 384848) to the external setscrew. The application of OMC Screw Lock will secure the setscrew and help prevent leaks around it. On gearcase with phillips head setscrew, tighten setscrew securely. On gearcases with allen head setscrew, setscrew should be screwed in until flush with outer surface of gearcase.

EVINRUDE MOTORS
Service Department