Evinrude Service Bulletin #1264: Bore Sizes - Standard Engines

Factory service bulletin issued in 1980. Historical reproduction of the original 1-page technical document.

Evinrude Service Bulletin
POWERHEAD #1264
May, 1980
Subject: Bore Sizes - Standard Engines Models: All 1969 -1979 Outboards We have received reports about problems in determining the correct bore sizes for stock and oversize cylinders. Measuring the piston to determine bore size can be difficult because of taper and other irregular configurations. To determine correct bore size for oversize piston, merely add oversize dimensions to standard bore size. Example: Determine correct bore size for model 200 cylinder block using .030” oversize piston. Standard bore is 3.4995” - 3.5005”. Add .030”, this becomes 3.5295” - 3.5305”. See below for list of bore sizes for 1969 through 1979 models. Cylinder bore specifications for 1980 models can be found in your outboard service manuals. CR 79-91 Standard Cylinder Bore Specifications For 1969 - 1978 Motors Outboard Models 1969 - 1979 Bore Size (Inches) Bore Size (Cm.) 11/2 &2-All 1.5668 to 1.5675 3.9797 to 3.9814 4-All 1.5643 to 1.5650 3.9733 to 3.9751 6 - All 1.9373 to 1.9380 4.9207 to 4.9225 9 1/2- All 2.3120 to 2.3130 5.8724 to 5.8750 9.9 & 15 - All 2.1875 to 2.1883 5.5562 to 5.5582 20/25 - 1974 - 1976 22 Cu. In. (360 Cu.Cm.) 2.4995 to 2.5005 6.3487 to 6.3513 20*/25-1977-1979 31.8Cu.In. (521Cu.Cm.) 2.9995 to 3.0005 7.6187 to 7.6213 33 - All 40.5 Cu.In, (663Cu.Cm.) 3.0620 to 3.0630 7.7775 to 7.7800 35 - All 31.8 Cu. In, (521 Cu. Cm.) 2.9995 to 3.0005 7.6187 to 7.6213 40-All 43.9 Cu.In. (719Cu.Cm.) 3.1870 to 3.1880 8.0950 to 8.0975 50 - All 41.5Cu.In. (680Cu.Cm.) 3.0595 to 3.0605 7.7711 to 7.7737 50/55/60 - All 44.9Cu.In. (735 Cu. Cm.) 3.1870 to 3.1880 8.0950 to 7.6213 70/75 - All 49.7 Cu. In. (814 Cu. Cm.) 2.9995 to 3.0005 7.6187 to 7.6213 85 - Thru 1978 92 Cu. In. (1507 Cu.Cm.) 3.3745 to 3.3755 8.5712 to 8.5738 115 - All 96 Cu. In. (1573 Cu.Cm.) 3.4375 to 3.4385 8.7312 to 8.7338 85/100/115/ 135/140 - All 99 Cu. In. (1622 Cu.Cm.) 3.4995 to 3.5005 8.8887 to 8.8913 150/175/200 - All 149 Cu. In. (2441Cu.Cm.) 3.4995 to 3.5005 8.8887 to 8.8913 235 - 1978 -1979 149Cu.In. (2441Cu.Cm.) 3.4995 to 3.5005 8.8887 to 8.8913 * Not sold in U.S. EVINRUDE MOTORS Service Department ©OUTBOARD MARINE CORPORATION 1980 ALL RIGHTS RESERVED

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Cylinder Hone Tool, Piston Ring Compressor & Digital Bore Caliper

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.