PEP-1 - 140 H.P. Motors on Bass Boats

Johnson's Performance Efficiency Pointers No. 1 discusses propeller ventilation on high-transom bass boats and illustrates the factory-recommended double-cup modification for SST propellers.

Johnson Outboards Performance Efficiency Pointers letterhead

Subject:   140 H.P. Motors on Bass Boats

There have been reports of propeller ventilation with 140 H.P. motors on high transom bass boats, when trimming out for maximum speed.

Ventilation occurs if the motor is too high on the transom and can usually be corrected by lowering the motor one transom mounting hole. If the motor cannot be lowered, the problem can often be corrected by adding more cup to the propeller.

We recommend having your local propeller shop “double cup” SST propellers as illustrated in figure.

Note: Adding cup has the effect of increasing propeller pitch, so it may be necessary to drop one pitch when adding cup, i.e. a 19 inch SST with added cup allows engine RPM approximately equal to a standard 21 inch SST.

Do not attempt to cup aluminum propellers as they may crack.

Motor height and trim can be very critical on high performance hulls, which include many bass boats. As little as 1/2 inch change in a motor height can result in a measurable speed increase with proper trim.

Excessive height or trim will result in propeller ventilation, a large rooster tail, exhaust noise, and a marked loss of boat speed.

Factory propeller double-cup technical diagram showing shaded trailing edge, 3/16 inch dimension, and 19, 21 and 23 inch SST propeller application

Historical notes

The factory recommends consulting a propeller shop for stainless-steel propeller modification and specifically cautions against cupping aluminum propellers. The original technical diagram is reproduced on page 2.

1970-1980 Johnson Service Bulletin Index

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Skeg Guard / Metal File & Deburring Tool Set

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.