PEP-5 - Transom Wedges

Johnson's July 1977 safety warning describes the importance of solid, properly supported transom wedges and the risks of loose mounting bolts or steering-control loss.

Johnson Outboards Performance Efficiency Pointers factory letterhead
July, 1977
Safety warning symbolSAFETY WARNING

SUBJECT:   TRANSOM WEDGES

MODELS:   (USE SAME AS IN PERFORMANCE BULLETIN #3)

When using transom wedges as described in Performance Bulletin #3, it is important that you select wedges that are strong enough to support outboard thrust and turning loads. Weak, improperly designed or jury rigged wedges can cause mounting bolts to loosen. A broken stern bracket and possible loss of steering control can result.

For this reason we recommend the use of solid aluminum wedges which contact the full mounting surface of the stern bracket. Wedges of this type are currently available from local sources.

Factory diagram showing front and side views of solid aluminum transom wedges
JOHNSON OUTBOARDS
D.J. Leinonen
Technical Data Coordinator

DL/cld

Historical reference

This publication refers to Performance Bulletin #3 for its model applications and earlier discussion of transom wedges. The source bulletin does not provide a verified URL for that publication.

1970-1980 Johnson Service Bulletin Index

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Boat Steering Cable Grease, Helm Support Tube & Stainless Hardware

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.