SB-1237 - Replacement Screw for the Anti-Reverse Contact and Insulator

Issued in April 1970, this Johnson Motors Service Bulletin specifies a shorter distributor-base screw to prevent looseness in the anti-reverse contact and insulator on certain 1969 and 1970 outboards.

Johnson Motors Service Bulletin letterhead
SB-#1237

April, 1970

SUBJECT:REPLACEMENT SCREW FOR THE ANTI-REVERSE CONTACT AND
INSULATOR
ON MODELS:1969 - 55 H.P., 85 H.P. and 115 H.P.
1970 - 60 H.P., 85 H.P. and 115 H.P.

An Engineering Change has recently been processed requesting that
the Screw, part #307466, be replaced with a 1/16" shorter screw,
part #306286.  The Screw, #307466, would bottom out at times on the
tapped hole in the distributor base.  This would leave the anti-
reverse contact and insulator in a loose condition.  The shorter
screw, part #306286, eliminates this loose condition.

JOHNSON MOTORS

Doug Cankar
Administrative Assistant

DC:rm

NOTE:Post on your 55 through 115 H.P. Indexes under the
heading "Ignition."