SB-1242 - Adjusting Low Speed Needles

Issued August 1970, this Johnson Motors service bulletin describes a low-speed needle knob-removal tool for 60, 85 and 115 H.P. outboards, and a related dash-panel service tip.

Johnson Motors Service Bulletin factory header
SB-#1242
August, 1970
SUBJECT: ADJUSTING LOW SPEED NEEDLES
ON MODELS: 1970 - 60, 85 and 115 H.P.
Factory photograph showing low speed needle adjustment Factory photograph of knob removing tool
If you remove the black plugs on the air silencer cover you can individually adjust the low speed needles - if you can "pop" the adjusting arm off the needle spline. To make that job easier, we have designed the tool illus-
trated. You simply insert this handy tool through the opening and behind the adjusting arm. By placing a screw- driver in one of the con- venient slots, you can "pop" the arm off of the needle spline. This tool makes the job so easy that every mechanic will want one in his tool box.
The Knob Removing Tool, P/N 384905, is priced at only $1.00 net. Order directly from the OMC Parts Depot in Galesburg.
SERVICE TIP
We now have available a dash panel kit, P/N 172346, which will cover the hole left when a customer trades for a 1970 model engine. The suggested list price is $12.75 and can be pur- chased through your Parts Distributor.
JOHNSON MOTORS
Doug Cankar Technical Data Coordinator
DC:rm
NOTE: Post on your 60, 85 and 115 H.P. Indexes under the heading "Carburetion."