SB-1261 - Reverse Cut-off Spring 313743

Issued in May 1971, this Johnson Motors bulletin warns against removing the reverse cut-off spring on 55 through 125 H.P. outboards. The spring prevents reverse engine rotation and a potentially dangerous reversal of the boat's response to shifting.

Johnson Motors Service Bulletin letterhead
SB-#1261

May, 1971

SUBJECT:  Reverse Cut-off Spring 313743

ON MODELS:  55 thru 125 H.P.

It has come to our attention that some dealers are removing the
reverse cut-off spring.  The purpose of this spring is to ground
the ignition system and prevent the engine from running backwards.
If you remove the spring from the system, you are creating a
potentially dangerous situation.
 When an engine is running back-
wards, the results of a gear shift are exactly opposite what the
operator intends.  A shift into reverse will move the rig forward
while a shift into forward will propel the boat to the rear.  For
safety's sake, don't remove the cut-off spring.

JOHNSON MOTORS

Doug Cankar
Technical Data Coordinator

DC/sn

NOTE:  Post on your 55 H.P. thru 125 H.P. indexes under the
       heading "Ignition".

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Outboard Ignition Spark Tester & Digital Multimeter

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 313743

Search for original or compatible replacement part 313743. Check the bulletin for supersessions and model fit.

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.