Johnson Service Bulletin SB-1264 - Lift Bracket P/N 315103

Issued June 1971, this bulletin recommends replacing potentially cracked lifting brackets on 1969-1971 V-4 outboards with hardened brackets identified by a stamped letter.

Johnson Motors Service Bulletin letterhead
SB-#1264
June, 1971
SUBJECT: Lift Bracket P/N 315103
MODELS: 1969-71 85 thru 125 H.P.
We have found several instances where the lift bracket on the V-4 engine has cracked. To eliminate this problem we are now making this bracket from a hardened material. Because cracks of this type can go undetected, it is possible that you could attempt to hoist an engine by a cracked bracket. Since there is a possibility of personal injury we are recommending that you install a new lift bracket made of the hardened material on any 1969-71 V-4 engine which comes into your shop for service.
NOTE: Brackets made of the hardened material can be identified by the letter "A", "B" or "C" stamped immediately above the part number.
JOHNSON MOTORS Doug Cankar Technical Data Coordinator
DC/sn
NOTE: Post on your 85-125 H.P. indexes under the heading "Miscellaneous".