SB-1275 - Oversize Pistons and Piston Rings

Issued in October 1971, this Johnson Motors bulletin announces .020-inch oversize pistons and rings for the KC-13R Stinger and warns against fitting Stinger pistons to 125ESL71 or 1972 outboards.

Johnson Motors Service Bulletin factory letterhead
SB-#1275

October, 1971

SUBJECT:  Oversize Pistons and Piston Rings

ON MODEL:  KC-13R, Stinger

Should reboring of the Stinger cylinders be necessary, .020 oversize pistons have now been released for this model as follows:

Oversize Pistons-

#385741 - .020 over @ $7.20 net each

Oversize Rings for above-

#384982 - .020 over @ $3.90 list per set

The oversize pistons must be ordered directly from Johnson Motors, Service Department, Waukegan, Illinois.

Oversize rings are the same as used on models 125ESL71 and 72 outboard and should be ordered from your regular Parts Distributor.

NOTE:The #385741 .020 oversize Stinger pistons should not be ordered for a 125ESL71 or 72 model motor as performance will be adversely affected due to changed port timing and compression caused by the Stinger piston.

JOHNSON MOTORS

J. R. Penland

Service Training Manager

JP/sn