Johnson Service Bulletin SB-1276 - Starter Spring Breakage

Issued in October 1971, this Johnson Motors bulletin updates recoil starter spring winding recommendations for 6 and 9½ H.P. engines to reduce starter spring breakage.

Johnson Motors Service Bulletin letterhead
SB-#1276

October, 1971

SUBJECT:  Starter Spring Breakage

MODELS:   6 & 9.5 H.P.

We have found that we can greatly increase the life of the starter
spring by decreasing the number of turns on the spring.

On 6 H.P. engines, we are recommending winding the spring 12½ turns
instead of the 16½ indicated in your service manual.

On 9½ H.P. engines, we are recommending winding the spring 18 turns
instead of the 20½ turns formerly recommended. Please note these
changes in your service manuals on page 7-4.

JOHNSON MOTORS
Doug Cankar
Technical Data Coordinator

DC/sn

NOTE:  Post on your 6 H.P. & 9 H.P. index under the heading
       "Miscellaneous".

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Outboard Ignition Spark Tester & Digital Multimeter

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.