November, 1971
SUBJECT: Throttle Cam #317635
MODEL: 1972 40 H.P.
We find that, in certain instances, the throttle cam on the 1972 40 H.P. engine will allow the starter interlock lever to come out of the guides on the starter housing. If this occurs, and the starter interlock lever does not return between the guides, the engine could be started in gear at any throttle setting.
To eliminate this potential danger, we have designed a new throttle cam, part number 318302, which must be installed on every 1972 40 H.P. engine built prior to the serial numbers listed below. If you have any of these engines in inventory replace the cam now before making delivery to a customer. If you have sold any of these engines, contact the owners and arrange to have the engines brought in for modifications. After installing the new cam, starter lock-out adjustment must be made as explained in the 1972 service manual on page 4-4.
Please file a warranty claim with the Johnson Motors Warranty Department for the throttle cams. Upon receipt of the claim we will ship the quantity you need and pay .6 hour per installation.
NOTE: Engines built before the following serial numbers must have the new style throttle cam installed.
DC/sn
NOTE: Post on your 40 H.P. index under the heading "Ignition".
FOOTNOTE: All 1972 electric start outboard motors are being shipped less negative and positive battery terminals. Reason being most batteries come equipped with the terminals. We do have available as an accessory a battery terminal kit part number 385407 which lists for $2.95.
