Johnson Service Bulletin SB-1298 - Air Silencer Screws

Issued in June 1972, this Johnson Motors bulletin recommends replacing the nylon-locking air silencer screws whenever they are removed during service, to prevent a loosened screw from entering the engine.

Johnson Motors Service Bulletin factory letterhead
SB-#1298

June, 1972

SUBJECT: Air Silencer Screws #314496 & #315092

ON MODELS: 50-125 H.P.

We are now recommending that the screws used to secure the air silencer base to the carburetor be replaced whenever they are removed during the course of service. These screws have a nylon locking pellet which can lose its effectiveness after the screw is removed and replaced several times. If this screw came out during operation of the engine, it could work its way into the engine causing extensive damage.

Original Johnson factory exploded diagrams for 50 HP, 55-60-65 HP and V-4 air silencer screws; arrows indicate screws to replace

JOHNSON MOTORS

Doug Cankar Technical Data Coordinator

DC/sn

NOTE: Post on 50-125 indexes under the heading "Carburetion".

Historical notes

Johnson specified replacement screws #314496 and #315092 for air silencer service on 50-125 H.P. outboards. The original exploded illustrations identify the fastener locations.

1970-1980 Johnson Service Bulletin Index