Johnson Service Bulletin SB-1299 - Gearcase to Exhaust Housing Screw

Issued July 1972, this bulletin identifies a revised gearcase attaching screw for Johnson 9½ HP outboards built from 1964 through 1972. The new screw improves the bearing surface for its captive lockwasher and is recommended when the gearcase is removed for service.

Johnson Motors Service Bulletin factory letterhead
July, 1972

SUBJECT:  Gearcase to Exhaust Housing Screw

ON MODELS:  1964 - 1972  9½ H.P. Engines

Our Engineering Department recently changed the gearcase attaching screws from P/N 312282 to P/N 310063. These new screws have a larger bearing surface for the captive lockwasher. This feature will allow more accurate torque to be applied to the screws thus eliminating the probability of a screw loosening during operation of the engine.

We recommend that the new type screws be substituted whenever you have a gearcase removed for service.

Factory gearcase and exhaust housing drawing, with arrows marked REPLACE THESE SCREWS
JOHNSON MOTORS

Doug Cankar
Technical Data Coordinator
DC/sn

NOTE:  Post on your 9½ H.P. index under the heading "Lower Unit".

Historical parts reference

312282 is the earlier gearcase attaching screw. 310063 is the replacement with an enlarged captive-lockwasher bearing surface. This reproduction preserves the original factory service recommendation.