SUBJECT: New Wiring Clamp P/N 385535
ON MODEL: 50ES (L) 73
There was a change made recently to the 50 H.P. timer base and sensor assembly P/N 385455 to add a wiring clamp. This new clamp P/N 385535 keeps the wires of the timer base and sensor assembly from rubbing on the powerhead as they come out of the arm of the timer base and sensor assembly.
With the addition of this new clamp, one slight modification has to be made to the powerhead so there is clearance for the clamp.
This modification has been made on all 1973, 50 H.P. blocks, but if a new timer base and sensor assembly is added to an older powerhead, you must modify the old style block.
The illustration shows the location of the boss on the powerhead with the flywheel removed. We recommend you take a file and file the boss as shown to provide adequate clearance.
Before installing the timer base and sensor assembly on the powerhead, make sure all metal filings are removed in the area in and around the timer base.

NOTE: Post on your 50 H.P. index under the heading "Ignition".