Johnson Service Bulletin SB-1331 Rev. 1 (January 1974) - New Idle Adjustment Stop

Johnson's revised idle adjustment stop, part number 386810, limits excessive throttle advance on 1974 9.9 and 15 HP outboards and helps prevent preignition.

Johnson Outboards Service Bulletin letterhead
SB-#1331 Rev. 1

January, 1974

SUBJECT:  New Idle Adjustment Stop, P/N 386810

MODELS:  1974, 9.9 & 15 H.P.

We recently changed the design of the idle adjustment stop used on 1974, 9.9 and 15 H.P. engines. The new design will act as an idle stop as well as a high speed throttle stop. This will assure that the spark cannot be over advanced which could cause preignition.

A quantity of the new idle stops have been shipped to you if our records indicate you received the 9.9 and 15 H.P. engines that were manufactured prior to the change. If any of the engines are in your stock, please install the new stop before selling the unit or on all customer owned engines install the stop when they are brought in for normal service.

No adjustments are necessary. Complete installation should take less than a minute.

To install the stop:

a.  Remove the fuel connector screws.
b.  Replace the old stop with the new one.
c.  Replace the fuel connector screw.
Factory photograph of combination idle adjustment and auxiliary high-speed stop
JOHNSON OUTBOARDS

D. J. Leinonen
Technical Data Coordinator

NOTE:  Post on your 9.9 and 15 H.P. indexes under the heading "Miscellaneous".

Historical reference

This revised bulletin identifies the combination idle and high-speed throttle stop, P/N 386810, for 1974 Johnson 9.9 and 15 HP engines.