SB-1339 - Checking Thrust Rod

Issued in March 1974, this Johnson Outboards Service Bulletin warns that a bent thrust rod can change reverse-lock release forces after a gearcase strikes an underwater object, risking stern-bracket damage or unexpected engine movement in reverse.

Johnson Outboards Service Bulletin letterhead
SB-#1339
March, 1974
SUBJECT: Checking Thrust Rod
ON MODELS: All Outboards
NOTE
If, when servicing an engine, you are aware that the gearcase has struck an underwater object, you should always check for a bent thrust rod. Often, this is the only visible sign of damage.
A bent thrust rod can increase the breakaway force required to release the reverse lock when the engine is being operated in forward gear. If the engine were to strike another under- water object, the breakaway force required can be so high that the force of the impact may cause the stern bracket to crack or break or cause extensive damage to the gearcase before the reverse lock releases.
A second affect a bent thrust rod can have is to reduce the force required to release the reverse lock when the engine is being operated in reverse gear. Under this condition, the reverse lock can release when the engine is accelerated in reverse, causing the engine to climb out of the water.
JOHNSON OUTBOARDS
D. J. Leinonen Technical Data Coordinator
DJL/sn
NOTE: Post on your 2 thru 135 H.P. indexes under the heading "Lower Unit".