Johnson Service Bulletin SB-1358 - Change in Service Manual

Issued in October 1974, this bulletin corrects starter rope length and pinion gear winding specifications for the 1974 Johnson 6 H.P. outboard, distinguishing aluminum and plastic starter spools.

Johnson Service Bulletin factory letterhead
SB-#1358

October 1974

SUBJECT: Change in Service Manual

ON MODEL: 1974 6 H.P.

Page 7-3 of your 1974 6 H.P. service manual lists the replacement starter rope as 56-1/4". This is correct if the engine is equipped with an aluminum rewind starter spool. If the engine has a plastic starter spool, the correct rope length is 51-3/4".

Page 7-5 of your service manual calls for 16-1/2 turns of the pinion gear when reassembling starter to powerhead. This specification should only be used if the starter spool is aluminum. If the starter spool is plastic the correct number of turns is 12-1/2.

Please make these corrections in your service manual.

JOHNSON OUTBOARDS D. J. Leinonen Technical Data Coordinator
DJL/kr NOTE: Post on your 6 H.P. index under heading "Miscellaneous". FOOTNOTE: (1) Change P/N 315868 in third paragraph of service bulletin SB-#1347 to read P/N 315869. (2) Change P/N 368535 in first paragraph of dealer letter DL-#273 to read 386535. NOTE: Post both of these entries on your footnote index.