Johnson Service Bulletin SB-1380 - Stator Resistance Readings

Issued March 1975, this bulletin compares coated and molded stator resistance specifications on 1974-1975 Johnson 50 through 135 H.P. outboards.

Johnson Service Bulletin factory letterhead
SB-#1380
March, 1975 SUBJECT: Stator Resistance Readings ON MODELS: 1974 thru 1975 50 thru 135 H.P. 1974 and 1975 50 through 135 H.P. engines may have either a coated type stator (coils are visible) or a molded type sta- tor (coils are not visible). While the coated type is inter- changeable with the molded stator, the resistance readings for each are different. Refer to the chart below when testing a stator.
Factory stator resistance chart with coated and molded stator illustrations
JOHNSON OUTBOARDS W. R. Scheske Manager, Technical Services

Searchable stator resistance specifications

The original factory chart is reproduced above. Values below are transcribed for searching; consult the original chart when performing measurements.

HorsepowerOutputCoated charge coilCoated alternator coilMolded charge coilMolded alternator coil
50 H.P.6 Amp875 ±75 ohms1.3 ±.3 ohms750 ±75 ohms1.3 ±.3 ohms
50 H.P.12 Amp860 ±75 ohms.2 ±.05 ohmsNot builtNot built
70-75 H.P.6 Amp875 ±75 ohms.9 ±.3 ohms630 ±75 ohms.9 ±.3 ohms
70-75 H.P.12 Amp870 ±75 ohms.3 ±.05 ohmsNot builtNot built
85, 115, 135 H.P.6 Amp900 ±75 ohms1.2 ±.3 ohms630 ±75 ohms1.2 ±.3 ohms
85, 115, 135 H.P.12 Amp860 ±75 ohms.2 ±.05 ohmsNot builtNot built

Related topic: stator charge coil overheating and alternator troubleshooting, SB-1370.

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Outboard Ignition Spark Tester & Digital Multimeter

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.