Back to previous page

SB-1401 - 12 Amp Alternator Kits

Issued January 1976, this Johnson Service Bulletin explains the required switched-power connection when fitting 12 amp alternator kits P/N 172651 and 173276 to 1976 55, 70 and 75 H.P. outboards. The original factory instructions are reproduced as searchable HTML.

Johnson Outboards Service Bulletin factory letterhead
SB-#1401

January, 1976

SUBJECT: 12 Amp Alternator Kits P/N 172651 and 173276

ON MODELS: 1976 55, 70, 75 H.P. Outboards

A change was made to the motor cable assembly on the 55 h.p., 70 h.p. and 75 h.p. for 1976 which removed the purple lead from these assemblies. This lead provided switched B+ for the regulator in the subject kits. Without it the regulator does not function, therefore, the battery could get too much current. During long periods of running this could result in overcharging and possible damage to the battery.

When these 12 amp alternator kits are installed on these engines, a purple 16 ga. lead should be connected from the ignition switch "ACC" terminal to the #4 terminal on the 55 h.p. terminal board and the #6 terminal on the 70 h.p. and 75 h.p. terminal board.

The lead that was removed from the motor cable assemblies on subject motors will be included in 1977 and later models.

JOHNSON OUTBOARDS

D. J. Leinonen

Technical Data Coordinator

DJL/kr

NOTE: Post on your Miscellaneous index under heading "Accessories."

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Digital Multimeter & Marine Electrical Connector Kit

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 172651

Search for original or compatible replacement part 172651. Check the bulletin for supersessions and model fit.

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.