Back to previous page

SB-1405 - Engine Overheating

Issued February 1976, this Johnson Service Bulletin warns of overheating on 1976 35 H.P. outboards operating in heavily vegetated water, even after installation of cooling-system kits P/N 388147 or 388148. The original factory warning is reproduced as searchable HTML.

Johnson Outboards Service Bulletin factory letterhead
SB-#1405

February, 1976

SUBJECT: Engine Overheating

ON MODELS: 1976 35 H.P. Models 35R(L)76S,35E(L)76S

We have received several reports from the field that, under certain conditions, the 1976 35 h.p. can overheat causing powerhead damage. This has occurred even after installing a P/N 388147 or 388148 Cooling System kit.

A careful study by our Engineering Department has shown that this problem can occur when operating in waters with heavy hyacinth growth, pepper grass or other aquatic weeds or grass. Under these circumstances there is the possibility of an insufficient volume of water being circulated from the water pump to the powerhead.

If you have 35 h.p. motor owners who have experienced overheating problems and who operate in waters with heavy marine growth as described above, please contact the Johnson Service Department. Phone 312/689-6258 - write to Johnson Outboards, Desk J3710, 701 Pershing Road, Waukegan, Illinois 60085. We will supply you with a modified impeller housing and instructions for drilling several additional water intake holes in the gearcase.

JOHNSON OUTBOARDS

D. J. Leinonen

Technical Data Coordinator

DJL/kr

NOTE: Post on your 35 h.p. index under heading "Lower Unit".