SB-1410 - Operation of Manual Release Valve

Issued in February 1976, this Johnson Service Bulletin explains normal manual release valve operation on 1976 200 H.P. outboards and cautions against opening the valve more than one turn.

Johnson Service Bulletin factory letterhead
SB-#1410
February, 1976
SUBJECT: Operation of Manual Release Valve
ON MODELS: 1976 200 H.P.
Several dealers have commented that the engine does not lower automatically when the manual release valve is turned. They stated they had to physically help by pushing on the gearcase or motor cover. This condition is normal and should not be considered a malfunction in the tilt system.
▣ NOTE
Do not open the manual release valve more than the one turn recommended in the owner's manual.
JOHNSON OUTBOARDS
D. J. Leinonen Technical Data Coordinator
DJL/kr
NOTE: Post on your 200 h.p. index under heading "Lower Unit".

Related factory information

Refer to the 1976 Johnson 200 H.P. owner's manual for the manual release valve operating instructions.

1970-1980 Johnson Service Bulletin Index

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Lower Unit Gear Oil Pump & Seal Puller Tool

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.