Johnson Service Bulletin SB-1428 (August 1976) - Electrical Components Bracket Ground Leads

Factory grounding instructions for Johnson V-6 outboards, identifying three powerpack and electrical bracket ground connections on both sides of the engine.

Johnson Service Bulletin letterhead
SB-#1428

August, 1976

SUBJECT:  Electrical Components Bracket Ground Leads

ON MODELS:  V-6 Outboards

The Johnson V-6 outboards have ground leads from the powerpack mounting screw to powerhead ground, Item 1, the electrical components bracket to powerhead ground, Item 2, and from the powerpack terminal #12 to the powerpack mounting screw, Item 3, on both starboard and port sides.  See Figures 1 and 2.

Whenever these components are removed, make sure, on reassembly, that all of these ground leads are correctly reinstalled.  Failure to do so may damage the powerpacks.

Figure 1, starboard-side powerpack and bracket ground connections 1, 2, and 3
Figure 2, port-side powerpack and bracket ground connections 1, 2, and 3
JOHNSON OUTBOARDS

D. J. Leinonen
Technical Data Coordinator

The original bulletin identifies ground lead locations on both the starboard and port sides. Refer to the factory figures when reconnecting wiring after servicing.