SB-1430 - Oil Pump Service Assembly #385056

Issued in September 1976, this Johnson Service Bulletin warns V-4 outboard dealers about incorrectly assembled oil pumps and explains how to identify the proper piston by measuring its shaft and overall length.

Johnson Service Bulletin factory letterhead
SB-#1430
September, 1976
SUBJECT: Oil Pump Service Assembly #385056
ON MODELS: V-4's
Safety warning triangle
SAFETY WARNING
It is imperative that you check your service stock of 385056 oil pump assemblies. There is a possibility that the piston 315709 which is used for oil pump assembly 385057 was installed rather than piston 315389. The 315709 piston is approximately 7/32" shorter than the 315389 piston.
Installation of the pump assembly with the short piston will result in the failure of the gearcase to shift properly through the forward-neutral-reverse-neutral-forward cycle, and could result in having the motor start in forward gear even though the control lever is in the neutral position.
To determine if the 385056 oil pump assemblies have the correct piston installed, measure the length of the shaft of the piston. The correct length is 2-1/2". If the incorrect piston is installed, the shaft length will be 2-1/4". See figures 1 and 2.
As the piston can easily be removed from the assembly, the overall dimension can be measured. The correct piston 315389 for oil pump assembly 385056 has an overall length dimension of 3.277" ± .005". See figure 3.
If the overall length dimension is 3.023" ± .005", the piston is part number 315709 and is used in oil pump assembly 385057. See figure 3.
To assure your customers of proper performance, please check your stock at once. Should you find a 385056 assembly with the shorter piston, correct the part number to 385057 and order the necessary replacements or file a warranty claim with your service department for the correct piston.
JOHNSON OUTBOARDS D. J. Leinonen Technical Data Coordinator
DJL/kr
NOTE: Post on your V-4 indexes under heading "Lower Unit".
Three original factory diagrams comparing correct 315389 and incorrect 315709 oil pump pistons and their dimensions