Johnson Service Bulletin SB-1447 (November 30, 1977) - 1978 V-4 Flywheels

Johnson warned that flywheels for 1978 85 through 140 HP V4 outboards are not interchangeable with earlier models. The 1978 flywheel is identified by a “CD 4” stamp.

Johnson Outboards Service Bulletin factory letterhead
SB #1447

November 30, 1977

SUBJECT: 1978 V-4 FLYWHEELS

The flywheels on 1978 85 to 140 H.P. motors are similar in appearance to earlier V-4 flywheels but are not interchangeable. The 1978 flywheels contain larger and higher powered magnets and will cause overheating and failure of the stator assembly if used on 1977 and earlier motors. Conversely, using 1977 flywheels on 1978 motors will not produce sufficient voltage for smooth running.

The 1978 V-4 flywheels may be identified by the “CD 4” stamped on the underside between the magnets and the hub.

JOHNSON OUTBOARDS
D. J. Leinonen
Technical Data Coordinator
NOTE: Post on 85 thru 140hp indexes under heading “IGNITION”.