SB-1461 - Lifting 1978 V-4 & V-6 Outboards

Issued in April 1978, this Johnson Service Bulletin cautions dealers against using certain parallel-arm shop hoists on the new plastic exhaust housing covers fitted to 1978 V-4 and V-6 outboards. Johnson recommends the supplied lifting brackets or Lifting Eye Tool P/N 321537.

Johnson Service Bulletin letterhead
SB-1461
April, 1978
SUBJECT: LIFTING 1978 V-4 & V-6 OUTBOARDS
The 1978 V-4 and V-6 outboard models are using new plastic exhaust housing covers underneath lower motor cover instead of the aluminum type which have been used in past years. Because of this, problems can develop when lifting these motors with certain hoists. Shop hoists that use parallel arms under motor cover for lifting can cause cracking or breakage of these covers. We are recommending that only the lifting brackets supplied with the motor or the Lifting Eye Tool P/N 321537 be used when lifting these motors.
JOHNSON OUTBOARDS
D.J. Leinonen
Technical Data Coordinator
CR78-30
NOTE: Post on V-4 & V-6 indexes under heading “Miscellaneous”.