Back to previous page

SB-1509 Rev. 1 - Use of Gasohol

Issued March 1980, this Johnson Service Bulletin explains Outboard Marine Corporation's historical guidance for gasoline containing 10% ethyl alcohol. It lists seven precautions for 1979 and 1980 outboards and expressly excludes V6 models. These are period factory instructions, not current fuel recommendations.

Johnson Service Bulletin factory letterhead
SB-1509 Rev. 1

March, 1980

Subject: Use of Gasohol

Models: All 1979 & 1980 Outboards (except V-6)

Outboard Marine Corporation has approved the use of gasohol in the United States in its Johnson outboard motors. Gasohol is a fuel generally composed of 10% ethyl alcohol and 90% lead free gasoline. HOWEVER, THE FOLLOWING PRECAUTIONS MUST BE TAKEN:

  1. 1.Gasohol may be used as the primary fuel in all 1979 and 1980 outboard motors with the exception of V-6 models. However, 1978 and older motors were not designed with gasohol usage in mind. Occasional use is acceptable in the older motors, but frequent use is not recommended.
  2. 2.V-6 motors require leaded fuel with a minimum of 94 Research or 89 Pump Posted Octane. Gasohol should not be used in these models.
  3. 3.Buy fuel as you need it. Gasohol tends to pick up moisture during storage.
  4. 4.Gasohol may dull paint. Avoid spilling it on painted surfaces.
  5. 5.Use Johnson 50/1 Lubricant and mix thoroughly. If not available, use any other BIA Certified TC-W oil at 50:1 and mix thoroughly.
  6. 6.Fuel cans should be agitated each day prior to running the motor to ensure good fuel/oil mixture.
  7. 7.Gasoline engines will operate leaner with gasohol. This may cause driveability problems associated with leaner mixtures.
JOHNSON OUTBOARDS
D.J. Leinonen
Technical Data Coordinator