SB-1517 - Adapter Plate P/N 322313

Issued in March 1980, this Johnson service bulletin identifies a missing cooling passage in some adapter plates used on 1979 150, 175, and 200 H.P. V-6 outboards. It includes Johnson and Evinrude production serial-number references and a factory illustration of the cooling passage.

Johnson Service Bulletin letterhead
SB-1517
March, 1980
Subject: Adapter Plate P/N 322313
Models: 1979 150, 175, 200 V-6 Outboards
There are indications that a cooling passage hole was missing on an undetermined number of adapter plates, Part Number 322313, for 150, 175 and 200 models. This hole is used to cool the tuning megaphone to reduce the likelihood of burning through and the resultant power loss.
The adapter plates were all made correctly after the following serial numbers and cartons stamped with the letter "J".
Johnson Models:
Evinrude Models:
150TL79 5189960
150TXL79 5190643
175TL79 5169511
175TXL79 5170149
200TL79 5170963
200TXL79 5172434
150949 04542
150940 01292
175949 02501
175940 01449
200949 02009
200940 01427
In some cases it may be difficult to detect any loss in performance when the megaphone has been damaged, making this condition hard to diagnose. We suggest that you inspect as many of these V-6 models as possible in the course of normal maintenance, and any replacement adapter plates you may have on hand. The location of this cooling hole is shown in Figure 1. If you have a V-6 with a slight unexplained drop in operating R.P.M., this may be the cause.
NOTE: Post on V-6 index under heading "Lower Unit."
CR 79-88 Rev. 1
© OUTBOARD MARINE CORPORATION 1980 ALL RIGHTS RESERVED
JOHNSON OUTBOARDS
D. J. Leinonen
Technical Data Coordinator
Figure 1 - adapter plate cooling passage