SB-1525 - Shifter Clutch Dog P/N 326340

Issued in March 1980, this Johnson service bulletin describes an incorrectly oriented shifter clutch dog on 1980 4.5 and 7.5 H.P. outboards, which may cause the engine to jump out of forward gear.

Johnson Service Bulletin letterhead
SB-1525
March, 1980
Subject: Shifter Clutch Dog P/N 326340
Models: 1980 4.5 and 7.5 H.P. Johnson® Outboards
It has been reported that some engines are jumping out of forward gear.
If this condition is encountered, the shifter clutch dog may have been incorrectly assembled due to improper marking on face of clutch dog. Disassembly of gearcase will be required to install clutch dog properly.
“Prop End” may have been stamped on the wrong end. When servicing, install the chamfered end of clutch dog toward the propeller end of propeller shaft. See Figure 1.
The clutch dog is mechanically locked into reverse but it requires a ramp to allow the shifter spring to force the dog out of reverse. If the dog is backwards, it will jump out of forward since the shifter spring can not overcome the torque of the forward gear pushing against the ramped end of the clutch dog.
Figure 1: clutch dog with forward lug, reverse lug chamfer and propeller end labeled