October, 1977
SUBJECT: K & O DYNAMOMETER
The K & O Dynamometer attaches to the prop shaft of outboards and stern drives and allows the unit to be run under load in a test tank or on the boat in or out of the water.
During tests of the 1600 and 2000 models, no adverse effects on motors were noted, provided cooling water was provided before starting the motor and tests were limited to two minutes.
When running motors out of the water, hearing protective devices should be used by everyone in the test area.
Other devices may be available that perform similar functions.
Since this dynamometer is not a product of Outboard Marine Corporation, OMC disclaims any liability for injury or damages of any kind or nature whatsoever arising out of the use or misuse thereof.
These dynamometers, provided by K & O, were used and satisfactory results were obtained when the instructions as to its proper use and application were followed, however, Outboard Marine Corporation has no control over the manufacture or quality control of these dynamometers or their contents and can not guarantee that all dynamometers in the future will give the same results.
For further information on the K & O Dynamometer, contact:
K & O Inc.
P.O. Box 12531
New Brighton, Minnesota 55112
Do not contact Outboard Marine Corporation.