SPB-486 - Permatex Gel-Gasket

Issued January 1978, this Johnson Service Promotion Bulletin cautioned dealers that Permatex Gel-Gasket was not approved as a replacement for OMC Gel-Seal. The factory warned of possible bearing and seal fit problems if the substitute was used.

Johnson Outboards Service Promotion letterhead
SPB - #486
January 1978
SUBJECT: PERMATEX - GEL-GASKET

It is our understanding that recently Permatex has been including a sample of Gel-Gasket with their package of Permatex #2.

Inasmuch as Permatex's Gel-Gasket name is very similar to the OMC Gel-Seal (P/N 322702, 1.7 Fl. Oz. and P/N 324073, 6 c.c.), recommended for use on our engines as a gasket eliminator in certain applications, we feel it is possible that a substitution of Gel-Gasket for the recommended and approved OMC Gel-Seal might be made in the field by Servicing Dealers.

Please be informed that Gel-Gasket, as offered by Permatex is NOT an approved substitute for applications calling for OMC Gel-Seal.

NOTE
Permatex Gel-Gasket is not recommended or approved by Marine Engineering in that the filler in Gel-Gasket can result in a shimming action between the cylinder and crankcase thereby making an improper fit of the internal bearing and seals which would be out of specifications resulting in possible engine malfunction.

Johnson Outboards

D.J. Leinonen

Technical, Data Coordinator

NOTE: Post on Service Promotion Bulletin index under heading, “Lubricants & Solutions”