
When the reboring of a cylinder block is needed, first consult your Parts Reference Guide or Parts Catalog to determine the Part Number of the oversized pistons listed for that powerhead. Determine from your parts source the availability of the desired size parts before the oversize rebore is specified (i.e., oversized pistons listed in Parts Reference Guide or Parts Catalog include .020", .030" .040", but for most engines, only they .030" size is now available at your distributor).
To the best of OMC's knowledge, complete Cylinder Reboring facilities are only available from:
2406 Rodman Avenue
Portsmouth, Virginia 23707
Phone: Area Code 804-397-3451
Highway 28
Old Forge, New York 13420
Phone: Area Code 315-369-3604
1015 N.E. 43 St.
Ft. Lauderdale, Florida 33334
Phone: Area Code 305-565-8401
5408 Paw Paw Lake Road
Coloma, Michigan 49038
Phone: Area Code 616-468-5338
Attention: Ron Fitz
1900 Cantrell Road
Little Rock, Arkansas 72202
Phone: Area Code 502-372-0985
701 Pershing Road
Waukegan, Illinois 60085
Phone: Area Code 312-689-6249
Before shipping the cylinder block be sure it is cleaned and completely stripped of all studs, cover, heads, etc.
Specify the oversize rebore required (i.e., .020", .030" etc.). Be sure to identify the cylinder block by model number, horsepower, and year of manufacture.
Remember to package the cylinder carefully to prevent damage during shipment.
Contact any of these boring services for their assistance in filling your cylinder reboring requirements.