July 1980 OMC service bulletin on shift rod scraper and O-ring assembly for 1980 35 models.

OMC Outboard Service Bulletin
Gearcase
No. 2002
July, 1980
Subject:Shift Rod Scraper
Models:1980 - 35 Models

In order to maintain the best possible water seal on 1980 gearcases, the 2 shift rod scrapers and the lower shift rod o-ring will be serviced together under P/N 391652. This shift rod scraper and o-ring assembly contains the 2 scrapers (which are no longer available separately) and a new o-ring P/N 326956. Please use these new part numbers when servicing these parts. See Figure below.

Exploded gearcase diagram showing shift rod scraper and O-ring locations

(Continued)

Gearcase
No. 2002
July, 1980

Item 25 has been changed to P/N 326361 Bushing, replacing P/N 325530 Seal: The remaining parts used with the bushing are not affected.

When removing the gearcase assembly on a 1980 35 outboard, the following steps will reduce any tendency for the upper shift rod to be restrained by the o-ring (item 44), located in the pump housing area.

  1. After removing connector (item 48) securing upper shift rod, wipe off shift rod to remove any foreign material so rod will easily pass thru scrapers and o-ring (items 43 & 44). A little lubricant on the rod will help.
  2. Loosening the two rearmost cap screws used to attach the pump housing will release pressure from the o-ring (item 44) reducing the tendency for the o-ring to catch in the groove in the lower end of the upper shift rod.
  3. Always inspect o-ring, P/N 326956, for cuts or nicks after removing gearcase and replace, if necessary. Later model 35 outboards using improved scrapers and o-ring (assembly 391652) have an improved upper shift rod with a radiused end, that will not tend to “hang-up” very readily.
  4. Always clean and lubricate the upper shift rod before reassembling the gearcase to the engine. Tighten two rear pump housing attachment screws after shift rod has been inserted thru scrapers and o-ring (items 43 & 44).

Related marine products

eBay: OMC / Evinrude part 391652

Listings matching the part number

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.