OMC Outboard Service Bulletin No. 2026, published August, 1981, addresses emergency ignition cut-off switch for All CN Model Outboards Except 2 and 4.

The CN model line features include an emergency ignition cut-off switch with the remote start engines. The switch is a feature of the remote control box that was shipped with the outboard.
Installation and use of an emergency ignition cut-off switch is highly recommended on any boat considered to have sensitive steering response. Examples of this type of boat would be: tiller steered boats, smaller runabouts, bass boats and high performance sport boats. In addition, this device should be used on any boat having less than 12” (305mm) between the driver's seat cushion and the top edge of the boat next to the driver's seat.
A lanyard from the switch is fastened securely to the boat operator's clothing. Normal operator movement is not affected by the presence of the lanyard but if the operator should leave the helm area without unfastening the lanyard, the cut-off switch will stop the engine.
Several kits are available to install on the CN models that do not have the emergency ignition cut-off switch as standard equipment. Some of these kits provide for mounting the switch on the engine and other kits position the switch on the dashboard or the gunwale of the boat.
The following chart indicates the part number of the kits, the switch position and the engine models on which the kits are used.
| Kit No. | Position | Models |
|---|---|---|
| 392899 | Engine | 4.5 - 35 - Rope and engine mounted electric start, C.D. ignition |
| 392897 | Engine | 40 - Commercial |
| 392811 | Engine | 55 - Rope start |
| 173960 | Dashboard | 9.9 - 15 - Remote electric start |
| 173962 | Dashboard-Gunwale | 4.5 - 35 - Rope and engine mounted electric start, C.D. ignition with remote throttle and shift controls |
| 393002 | Control-Dashboard | 50 - V-6 twin engine installations |
Wiring kit P/N 173959 for use with optional remote controls also includes an emergency ignition cut-off switch.
(Continued)


Switch kit P/N 393002 for twin engine installations includes diodes to allow both engines to be connected to one switch without causing ignition system malfunction.
Suggested products related to this service bulletin. Verify fit and suitability before ordering.
Universal marine engine emergency stop switch with lanyard
Search for these supplies on AmazonSearch for original or compatible replacement part 173959
Click here to search on eBayAffiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.